[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gulliver] [fedora core 2] module IEEE1394


From montuno <brucot at free dot fr>
Subject Re: [gulliver] [fedora core 2] module IEEE1394
Date Mon, 14 Jun 2004 21:04:33 +0200

Olivier Péningault wrote:

Le lun 14/06/2004 à 19:13, montuno a écrit :


Bonjour


Bonjour,



J'essaie de faire reconnaître un camescope Sony 560 Digital 8 par l'entrée IEEE1394, en vain.


Quand tu tapes 'dmesg' dans un shell, as tu des messages concernant la
présence d'un périphérique connecté ?
Sinon, quel soft utilises tu ?

a+

olivier



---- Liste gulliver ----
Se désinscrire, mailto:gulliver-unsubscribe at listes dot gulliver dot eu dot org
GULLIVER,       http://gulliver.eu.org/




Voila ce qu'il m'affiche lorsque je fais 'dmesg' , quand aux soft j'utilise gscanbus et kino.

Merci

[root at localhost salsero]# dmesg
0000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
zapping low mappings.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7640
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped 4G/4G trampoline to ffff3000.
Initializing CPU#0
CPU 0 irqstacks, hard=02346000 soft=02345000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1830.394 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 516448k/524224k available (1552k kernel code, 7012k reserved, 603k data, 144k init, 0k highmem)
Calibrating delay loop... 3620.86 BogoMIPS
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 188k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 9
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 5
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 9
PCI: Using ACPI for IRQ routing
vesafb: probe of vesafb0 failed with error -6
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1087237642.540:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xd8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E040L0, ATA DISK drive
hdb: ST310212A, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: SAMSUNG DVD-ROM SD-616Q, ATAPI CD/DVD-ROM drive
hdd: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hda: hda1 hda2 < hda5 hda6 >
hdb: max request size: 128KiB
hdb: 20005650 sectors (10242 MB) w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdb: hdb1 hdb2 < hdb5 hdb6 >
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S4bios S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 144k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
NET: Registered protocol family 10
Disabled Privacy Extensions on device 022deac0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
[drm] Initialized radeon 1.11.0 20020828 on minor 0:
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:03:00.0 into 1x mode
ACPI: Power Button (FF) [PWRF]
ehci_hcd 0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem 2286d000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 9, pci mem 22877000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 5, pci mem 22879000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb 3-2: new full speed USB device using address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7304
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
EXT3 FS on hda1, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk dot sistina dot com
cdrom: open failed.
cdrom: open failed.
Adding 1125896k swap on /dev/hda5. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
SCSI subsystem initialized
inserting floppy driver for 2.6.6-1.427
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ohci1394: $Rev: 1203 $ Ben Collins <bcollins at debian dot org>
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[e1084000-e10847ff] Max Packet=[2048]
sk98lin: Network Device Driver v6.23
(C)Copyright 1999-2004 Marvell(R).
divert: allocating divert_blk for eth0
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
Module sk98lin cannot be unloaded due to unsafe usage in drivers/net/sk98lin/skge.c:792
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25.
PCI: Setting latency timer of device 0000:00:04.0 to 64
divert: allocating divert_blk for eth1
eth1: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
divert: freeing divert_blk for eth1
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25.
PCI: Setting latency timer of device 0000:00:04.0 to 64
divert: allocating divert_blk for eth1
eth1: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
ip_tables: (C) 2000-2002 Netfilter core team
eth1: no link during initialization.
eth0: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
ieee1394: raw1394: /dev/raw1394 device initialized
ohci1394: $Rev: 1203 $ Ben Collins <bcollins at debian dot org>
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[e1084000-e10847ff] Max Packet=[2048]
video1394: Installed video1394 module
Badness in get_phy_reg at drivers/ieee1394/ohci1394.c:238
[<22d2d069>] get_phy_reg+0x69/0xc1 [ohci1394]
[<22d2db65>] ohci_devctl+0x48/0x47a [ohci1394]
[<021a0335>] acpi_ev_gpe_detect+0x109/0x115
[<22d2f2ee>] ohci_irq_handler+0x29f/0x57e [ohci1394]
[<0210708f>] handle_IRQ_event+0x21/0x41
[<02107322>] do_IRQ+0xf3/0x169
=======================
[<22d2d172>] set_phy_reg+0xb1/0xb6 [ohci1394]
[<22d2dbf1>] ohci_devctl+0xd4/0x47a [ohci1394]
[<22e1e46d>] csr1212_generate_csr_image+0x1a5/0x1b4 [ieee1394]
[<22e1611c>] hpsb_reset_bus+0x17/0x22 [ieee1394]
[<22e17fc8>] delayed_reset_bus+0x0/0xb6 [ieee1394]
[<0211dcc7>] run_timer_softirq+0x10b/0x12a
[<0211ae1d>] __do_softirq+0x35/0x73
[<02107906>] do_softirq+0x46/0x4d
=======================
[<0210738c>] do_IRQ+0x15d/0x169
[<0210403b>] default_idle+0x23/0x26
[<0210408c>] cpu_idle+0x1f/0x34
[<0231c51b>] start_kernel+0x178/0x17a


Badness in set_phy_reg at drivers/ieee1394/ohci1394.c:267
[<22d2d132>] set_phy_reg+0x71/0xb6 [ohci1394]
[<22d2dbf1>] ohci_devctl+0xd4/0x47a [ohci1394]
[<021a0335>] acpi_ev_gpe_detect+0x109/0x115
[<22d2f2ee>] ohci_irq_handler+0x29f/0x57e [ohci1394]
[<0210708f>] handle_IRQ_event+0x21/0x41
[<02107322>] do_IRQ+0xf3/0x169
=======================
[<22d2d172>] set_phy_reg+0xb1/0xb6 [ohci1394]
[<22d2dbf1>] ohci_devctl+0xd4/0x47a [ohci1394]
[<22e1e46d>] csr1212_generate_csr_image+0x1a5/0x1b4 [ieee1394]
[<22e1611c>] hpsb_reset_bus+0x17/0x22 [ieee1394]
[<22e17fc8>] delayed_reset_bus+0x0/0xb6 [ieee1394]
[<0211dcc7>] run_timer_softirq+0x10b/0x12a
[<0211ae1d>] __do_softirq+0x35/0x73
[<02107906>] do_softirq+0x46/0x4d
=======================
[<0210738c>] do_IRQ+0x15d/0x169
[<0210403b>] default_idle+0x23/0x26
[<0210408c>] cpu_idle+0x1f/0x34
[<0231c51b>] start_kernel+0x178/0x17a

ohci1394: fw-host0: SelfID received outside of bus reset sequence
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180000531e99]
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:03:00.0 into 1x mode
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49456 usecs
intel8x0: clocking to 47478
[root at localhost salsero]#