tristate 'Sound card support'
tristate 'Support for C-Media PCI audio chips (Experimental)'
bool 'Enable legacy FM'
bool 'Enable legacy MPU-401'
dep_tristate 'Ensoniq AudioPCI (ES1370)'
bool 'Joystick support at boot time'
dep_tristate 'Creative Ensoniq AudioPCI 97 (ES1371)'
bool 'Joystick support at boot time'
hex 'Gameport I/O 200,208,210,218'
tristate 'ESS Maestro'
tristate 'ESS Solo1 (Experimental)'
tristate 'S3 SonicVibes'
tristate 'SGI Visual Workstation Sound'
tristate 'Support for Turtle Beach MultiSound Classic, Tahiti, Monterey'
int 'MSND Classic IRQ 5,7,9,10,11,12'
hex 'MSND Classic memory B0000,C8000,D0000,D8000,E0000,E8000'
hex 'MSND Classic I/O 210,220,230,240,250,260,290,3E0'
tristate 'Support for Turtle Beach MultiSound Pinnacle, Fiji'
int 'MSND Pinnacle IRQ 5,7,9,10,11,12'
hex 'MSND Pinnacle memory B0000,C8000,D0000,D8000,E0000,E8000'
hex 'MSND Pinnacle I/O 210,220,230,240,250,260,290,3E0'
bool 'MSND Pinnacle has S/PDIF I/O'
bool 'MSND Pinnacle non-PnP Mode'
hex 'MSND Pinnacle config port 250,260,270'
hex 'MSND Pinnacle MPU I/O (e.g. 330)'
int 'MSND Pinnacle MPU IRQ (e.g. 9)'
hex 'MSND Pinnacle IDE I/O 0 (e.g. 170)'
hex 'MSND Pinnacle IDE I/O 1 (e.g. 376)'
int 'MSND Pinnacle IDE IRQ (e.g. 15)'
hex 'MSND Pinnacle joystick I/O (e.g. 200)'
int 'MSND buffer size (kB)'
tristate 'OSS sound modules'
bool 'Persistent DMA buffers'
tristate 'ProAudioSpectrum 16 support'
int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15'
int 'PAS16 DMA 0, 1, 3, 5, 6 or 7'
bool 'Enable PAS16 joystick port'
tristate '100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support'
hex 'I/O base for SB Check from manual of the card'
int 'Sound Blaster IRQ Check from manual of the card'
int 'Sound Blaster DMA 0, 1 or 3'
int 'Sound Blaster 16 bit DMA (SB16, Jazz16, SMW) 5, 6 or 7 (use 1 for 8 bit cards)'
hex 'MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the card'
int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Check from manual of the card'
tristate 'Gravis Ultrasound support'
bool '16 bit sampling option of GUS (_NOT_ GUS MAX)'
bool 'GUS MAX support'
hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260'
int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15'
int 'GUS DMA 1, 3, 5, 6 or 7'
int 'Second DMA channel for GUS 1, 3, 5, 6 or 7'
hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40'
int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9'
int 'GUS DMA 0, 1 or 3'
tristate 'MPU-401 support (NOT for SB16)'
hex 'I/O base for MPU401 Check from manual of the card'
int 'MPU401 IRQ Check from manual of the card'
tristate 'PSS (AD1848, ADSP-2115, ESC614) support'
hex 'PSS I/O base 220 or 240'
hex 'PSS audio I/O base 530, 604, E80 or F40'
int 'PSS audio IRQ 7, 9, 10 or 11'
int 'PSS audio DMA 0, 1 or 3'
hex 'PSS MIDI I/O base '
int 'PSS MIDI IRQ 3, 4, 5, 7, 9, 10, 11, 12'
bool ' Have DSPxxx.LD firmware file'
string ' Full pathname of DSPxxx.LD firmware file'
bool ' Enable PSS mixer (Beethoven ADSP-16 and other compatibile)'
tristate 'Microsoft Sound System support'
bool ' Enable support for the SoundPro mixer'
hex 'MSS/WSS I/O base 530, 604, E80 or F40'
int 'MSS/WSS IRQ 7, 9, 10 or 11'
int 'MSS/WSS DMA 0, 1 or 3'
int 'MSS/WSS second DMA (if possible) 0, 1 or 3'
tristate 'Ensoniq SoundScape support'
hex 'SoundScape MIDI I/O base 320, 330, 340 or 350'
int 'SoundScape MIDI IRQ '
int 'SoundScape initialization DMA 0, 1 or 3'
hex 'SoundScape audio I/O base 534, 608, E84 or F44'
int 'SoundScape audio IRQ 7, 9, 10 or 11'
tristate 'MediaTrix AudioTrix Pro support'
hex 'TRIX audio I/O base 530, 604, E80 or F40'
int 'TRIX audio IRQ 7, 9, 10 or 11'
int 'TRIX audio DMA 0, 1 or 3'
int 'TRIX second (duplex) DMA 0, 1 or 3'
hex 'TRIX MIDI I/O base 330, 370, 3B0 or 3F0'
int 'TRIX MIDI IRQ 3, 4, 5, 7 or 9'
hex 'TRIX SB I/O base 220, 210, 230, 240, 250, 260 or 270'
int 'TRIX SB IRQ 3, 4, 5 or 7'
int 'TRIX SB DMA 1 or 3'
bool ' Have TRXPRO.HEX firmware file'
string ' Full pathname of TRXPRO.HEX firmware file'
tristate 'VIA 82C686 Audio Codec'
tristate 'Support for OPTi MAD16 and/or Mozart based cards'
bool 'Support MIDI in older MAD16 based cards (requires SB)'
hex 'MAD16 audio I/O base 530, 604, E80 or F40'
int 'MAD16 audio IRQ 7, 9, 10 or 11'
int 'MAD16 audio DMA 0, 1 or 3'
int 'MAD16 second (duplex) DMA 0, 1 or 3'
hex 'MAD16 MIDI I/O base 300, 310, 320 or 330 (0 disables)'
int 'MAD16 MIDI IRQ 5, 7, 9 or 10'
tristate 'Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards'
hex 'I/O base for WaveFront 210, 230, 260, 290, 300, 320, 338 or 330'
int 'WaveFront IRQ 5, 9, 12 or 15'
tristate 'Support for Crystal CS4232 based (PnP) cards'
hex 'CS4232 audio I/O base (normally 530, 604, E80 or F40)'
int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15'
int 'CS4232 audio DMA 0, 1 or 3'
int 'CS4232 second (duplex) DMA 0, 1 or 3'
hex 'CS4232 MIDI I/O base 330, 370, 3B0 or 3F0'
int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15'
tristate 'Support for Yamaha OPL3-SA2, SA3, and SAx based PnP cards'
int 'Chipset (-1 for autoprobe, 2, or 3)'
hex 'OPL3SA2 audio I/O base (530 - F48 valid)'
int 'OPL3SA2 audio IRQ 5, 7, 9, 11, 12 or 15'
int 'OPL3SA2 audio DMA 0, 1 or 3'
int 'OPL3SA2 second (duplex) DMA 0, 1 or 3'
hex 'OPL3SA2 control I/O base (100 - FFE valid)'
hex 'OPL3SA2 MIDI I/O base (300 - 334 valid)'
int 'OPL3SA2 MIDI IRQ 5, 7, 9, 11, 12 or 15'
tristate 'Limited support for Turtle Beach Wave Front (Maui, Tropez)synthesizer'
hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330'
int 'Maui IRQ 5, 9, 12 or 15'
bool ' Have OSWF.MOT firmware file'
string ' Full pathname of OSWF.MOT firmware file'
tristate 'Support for Aztech Sound Galaxy (non-PnP) cards'
hex 'SGALAXY audio I/O base 530, 604, E80 or F40'
int 'SGALAXY audio IRQ 5, 7, 9, 11, 12 or 15'
int 'SGALAXY audio DMA 0, 1 or 3'
int 'SGALAXY second (duplex) DMA 0, 1 or 3'
hex 'SGALAXY SB I/O base 220 or 240'
tristate 'Support for AD1816(A) based cards (EXPERIMENTAL)'
hex 'AD1816 audio I/O base 530, 604, E80 or F40'
int 'AD1816 audio IRQ 5, 7, 9, 11, 12 or 15'
int 'AD1816 audio DMA 0, 1 or 3'
int 'AD1816 second (duplex) DMA 0, 1 or 3'
int 'AD1816 clock chip frequency'
tristate 'Yamaha OPL3-SA1 audio controller'
hex 'OPL3-SA1 audio I/O base 530, 604, E80 or F40'
int 'OPL3-SA1 audio IRQ 7, 9, 10 or 11'
int 'OPL3-SA1 audio DMA 0, 1 or 3'
int 'OPL3-SA1 second (duplex) DMA 0, 1 or 3'
hex 'OPL3-SA1 MIDI I/O base 330, 370, 3B0 or 3F0'
int 'OPL3-SA1 MIDI IRQ 3, 4, 5, 7 or 9'
tristate 'SoftOSS software wave table engine'
int 'Sampling rate for SoftOSS 8000 to 48000'
int 'Max # of concurrent voices for SoftOSS 4 to 32'
tristate 'FM synthesizer (YM3812/OPL-3) support'
tristate 'Loopback MIDI device support'
tristate '6850 UART support'
hex 'I/O base for UART 6850 MIDI port (Unknown)'
int 'UART6850 IRQ (Unknown)'
tristate 'VIDC 16-bit sound'
tristate 'Netwinder WaveArtist'
hex ' WaveArtist I/O base'
int ' WaveArtist IRQ'
int ' WaveArtist DMA'
int ' WaveArtist second DMA'
tristate 'NM256AV/NM256ZX audio support'